Technical Information

Technical Information includes replacement guide, precipitation rates, height of spray, PLD charts, friction loss charts, wire data, wire sizing and others.

Design guide residential system

Hunter design guide is intended to be used when designing and installing small single family residential sprinkler systems. It is set up in an easy-to-follow format with illustrations and charts.

Rugby playing field Plan

The rugby league playing field is the playing surface for the sport of rugby league football and is surfaced exclusively with grass.

Drip irrigation design guide

There are many parts to a typical drip system, but a Micro irrigation system offers users the most value, including better control and water savings.

Football Field Plan

These designs are “typical” layouts, realizing that there will be different field measurements in the real world applications.

Football Field Plan

These designs are “typical” layouts, realizing that there will be different field measurements in the real world applications.

Baseball Field Plan

These Sports Field Irrigation Designs shows an automatic irrigation system for a baseball field by using I-20, I-25, I-40 Rotor.

Croquet Field Plan

Croquet is a sport that involves hitting plastic or wooden balls with a mallet through hoops embedded in a grass playing court.

Tennis Field Plan

Each of these designs has been created using Hunter products: I-25, I-40 Rotor depending upon the requirement of the tennis field.

Cricket Field Plan

A cricket field consists of a large grassy ground on which the game is played, this is ostensibly an oval though most cricket grounds.

Lacrosse Field Plan

Field lacrosse is a full contact outdoor men’s sport played with ten players on each team.

Lawn bowling Field Plan

Lawn bowls is a sport played on a bowling green which may be flat (for “flat-green bowls”) or uneven (for “crown green bowls”).

Rugby playing field Plan

The rugby league playing field is the playing surface for the sport of rugby league football and is surfaced exclusively with grass.

Multi-purpose Field Plan

These designs has been created using Hunter products: I-20, I-25, I-40 Rotor depending upon the requirement of the field.

Rotor Nozzle Installation

Insert the plastic end of the Hunter adjustment wrench into the lifting socket of the rotor and turn 90 degrees. Pulling up the riser will allow access to the nozzle port for installation.

Radius Adjustment

The radius adjustment changes the distance water is going to travel out of the nozzle. Fine tuning coverage in your system can sometimes require adjustments to a rotors radius.

Replacement Guide

Replacement guide: spray sprinklers and PGJ rotary sprinklers. Receive Hunter quality and Hunter performance with the right substitute for your non-Hunter sprinklers.

X-Core Troubleshooting Guide

This section will show you how to troubleshoot your X-Core controller.

Pro-C Troubleshooting Guide

This guide will show you how to troubleshoot your Pro-C irrigation controller.

I-Core Troubleshooting Guide

This guide will show you how to troubleshoot your I-Core irrigation controller.

DUAL for I-Core Manual

DUAL is Hunter’s innovative two-wire plug-in for the I-Core controller. The DUAL system can operate up to 48 zones via a single pair of wires, at distances up to 2.3 km.

NODE Troubleshooting Guide

This guide will show you problems, causes and solutions for your Node irrigation controller

Mini-Clik Sensor Manual

The Mini-Clik rain sensor provides the simplest, most effective way to prevent sprinklers from running during rainfall. The Mini-Clik stops scheduled irrigation when it’s rain.

Pump Start Relay Manual

When a system requires the use of a booster pump or pulls water directly from a creek or pond, Pump Start Relay (PSR) that can be counted on to activate the pump each and every time.

Tưới tự động, hệ thống tưới tự động, bộ điều khiển hunter, đầu tưới hunter 

Sự cố mất áp lực tưới

Đường ống cấp bị vỡ hoặc lưu lượng vượt quá công suất nguồn cấp khiến mất áp nước gây ảnh hưởng đến sự vận hành hệ thống.

Đầu tưới Rotor không quay

Qua một thời gian dài vận hành, các cặn bẩn xâm nhập vào hệ bánh răng truyền động.

Nguyên nhân đọng nước đầu tưới

Khi đầu tưới hoạt động, nước tồn trong các đường ống tại các điểm cao sẽ dồn về và thoát ra tại đầu tưới nằm tại điểm thấp nhất.

Thân đầu tưới rò rỉ nước khi hoạt động

Trong mỗi đầu tưới rotor đều có roong kín nước, có thể bị mòn qua thời gian dài hoạt động, cách xử lý là thay thế roong khác.

Xử lý sự cố bộ điều khiển X-Core

Bảng liệt kê các sự cố có thể xảy ra khi sử dụng bộ điều khiển X-Core, nguyên nhân và cách xử lý.

Xử lý sự cố bộ điều khiển Pro-C

Bảng liệt kê các sự cố có thể xảy ra khi sử dụng bộ điều khiển Pro-C, nguyên nhân và cách xử lý.

Xử lý sự cố bộ điều khiển I-Core

Các sự cố có thể xảy ra khi sử dụng bộ điều khiển I-Core, nguyên nhân và cách xử lý

Xử lý sự cố của các module DUAL

Cách xử lý các sự cố có thể xảy ra trong quá trình hoạt động hoặc cài đặt của bộ giải mã Dual

Xử lý sự cố bộ điều khiển NODE

Cách xử lý các vấn đề xảy ra khi bộ điều khiển bằng pin NODE hoạt động

ACC Troubleshooting Guide

This section will show you how to troubleshoot your ACC irrigation controller.